AMS标准被誉为航空航天材料领域的“全球性标准”，适用于全球范围内航空飞行器零件、系统的设计和生产以及采购，也是可供我国航空材料研制、生产和使用参照的重要材料标准。
1.AMS7014-2019 Titanium Alloy. High Temperature Applications, Powder for Additive Manufacturing.Ti-6.0Al-2.0Sn-4.0Zr-2.0Mo增材制造用Ti-6.0Al-2.0Sn-4.0Zr-2.0Mo高温钛合金粉末
This specification covers a heat-resistant titanium alloy in the form of pre alloved powder.
2.AMS7004-2019 Titanium Alloy Preforms from Plasma Arc Directed Energy Deposition Additive Manufacturing on Substrate Ti-6Al-4V Stress Relieved等离子强定向能量沉积增材制造成形TI-6A1-4V合金预成形体(去应力态)
This specification covers preforms fabricated up through 5.5 inches(140 mm) inclusive in deposition width thickness(see 82.5)using a Plasma Arc Directed Energy Deposition(PA-DED) additive manufacturing process on a Ti-6Al-4V substrate that are subjected to post-deposition stress relief heat treatment.This is a wire fed additive manufacturing process.If required by the CEOpreforms may require subsequent machining to meet requirements for their intended final part application.
3.AM54919J-2019 Titanium Alloy Sheet, Strip, and Plate 6Al-25n-4Zr-2Mo
0.08Si Duplex Annealed
双重退火Ti-6Al-25n-4Zr-2Mo-0.085i合金薄板、带材及板材
This specification covers a titanium alloy in the form of sheet, strip, and plate 0.025 to 3.000 inches(0.64 to 76.20mm),inclusive,in nominal thickness.
4.AMS6947B-2019 Titanium Alloy, Bars, Wire, Forgings, Rings,and Drawn Shapes 4AI-2.5V-1.5Fe Annealed, Heat Treatable
可热处理的退火态Ti-4AI-2.5V-1.5Fe合金棒材、丝材、锻件、环件及拉拔型材
This specification covers a titanium alloy in the form of bars, wire forgings,flash welded rings,drawn shapes 4.000 inches(101.60 mm) and under and stock for forging headingor flash welded rings of any size.
5.AMS6907C-2020 Titanium Alloy Bars, Forgings, and Forging Stock 6.0AI-
2.05n-4.0Zr-6.0Mo Duplex Annealed
双重退火Ti-6.0A1-2.05n-4.0Zr-6.0Mo含金棒材，锻件及搬坯
This specification covers a titanium alloy in the form of bars, forgings up through 4.000 inches(101.60 mm),inclusive in nominal diameter or least distance between parallel sides and 32 square inches (206.46 cm2)maximum cross sectional area, and stock for forging of any size
6.AMS6907C-2020 Titanium Alloy Bars, Forgings and Forging Stock 6.0Al
2.0Sn-4.0Zr-6.0Mo Duplex Annealed
双重退火Ti-6.0Al-2.0Sn-4.0Zr-6.0Mo合金楼材、银件及锻还
This specification covers a titanium alloy in the form of barsforgings up throuah 4000 inches101.60 mm), inclusive in nominal diameter or leas distance between parallel sides and 32 square inches (206.46 cm2)maximu cross sectional area,and stock for forging of any size
7.AMS6906C·2019 Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al
2.0Sn-4.0Zr-6.0Mo Solution Heat Treated and Aged
固溶时效态Ti-6.0Al-2.05n-4.0Zr-6.0Mo合金棒材，假件及假还
This specification covers a titanium alloy in the form of bars up through
4.000 inches(101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches(101.60 mm) inclusive, and stock for forging of any size(see 8.7)
8.AMS6920D-2019 Titanium Alloy Bars, Forgings and Forging Stock 3AI-8V.6Cr-4Mo-4Zr Solution Heat Treated
固溶热处理态Ti-3A1-8V-6Cr-4Mo-4Zr台金棒材，锻件及锻还
This specification covers a titanium alloy in the form of bars up through
4.000 inches(101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches(101.60 mm).
inclusive and stack for foraian ofanw sizefsee 863 for toraina otanyszesee 8.b)
9.AMS6926C-2019 Titanium Alloy Bars, Forgings and Forging Stock 13V-11Cr-3AI Solution Heat Treated and Aged固溶时效态Ti-13V-11Cr-3AI合金棒材、锻件及锻坯
This specification covers a titanium alloy in the form of bars up through
4.000 inches(101.60 mm) inclusive, in nominal diameter or least distance between parallel sides, forgings of thickness up through 4.000 inches(101.60 mm), inclusive, and stock for forging of any size (see 8.6).
10.AMS4926P-2019 Titanium Alloy. Bars Wire and Rings 5AI-2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
退火态、忌暖强度110 ksi(758 MPa)Ti-5AI-2.5Sn合金棒材、丝材及环件
This specification covers a titanium alloy in the form of bars, wire,flash welded rings 4.000 inches(101.60 mm) and under in nominal diameter or least distance between parallel sides and 16 in2(103 cm2) and under in cross- sectional area, and stock of any size for flash welded rings.
11.AMS4931G-2019 Titanium Alloy Bars, Forgings, and Rings 6Al-4V Extra
Low Interstitial(ELl) Duplex Annealed Fracture Touqhness间隙双退火态Ti-6AI-4V合金棒材、锻件和环件
This specification covers a titanium alloy in the form of bars 6.000 inches(152.40 mm) and und
